About CNC Plasma Machine
CNC Plasma Machine is a Germiston build shop focused on standard-bed CNC plasma machines in 1.3 x 2.5 m, 1.5 x 3.0 m and 2.0 x 3.0 m sizes. We build to order, configure each machine by option code, and commission it on the customer’s floor with operator training.
Built around three standard bed sizes
Our work stays tightly focused: standard-bed CNC plasma machines built in 1 300 x 2 500 mm, 1 500 x 3 000 mm and 2 000 x 3 000 mm formats. Those sizes suit many steel fabrication jobs in South Africa, from small brackets and base plates to larger sheet layouts for gates, tanks, frames and production parts. Each machine is assembled to order in Germiston and prepared as part of a focused local build range.
We keep to the machine range we know and support properly. The range covers fixed-bed CNC plasma machines in three standard sizes, with defined options and known dimensions. It gives shops a clear choice when they need a fixed-bed machine for regular fabrication work.
- 1.3 x 2.5 m bed size for compact floor plans and smaller sheet work
- 1.5 x 3.0 m bed size for general fabrication and day-to-day production
- 2.0 x 3.0 m bed size for wider work and larger plate layouts
- Option-based builds matched to the job requirements
How a machine is specified here
Every machine is configured by option code. That gives the buyer a straightforward way to set up the build around the material mix, the operator’s working style and the floor conditions at the site. A shop cutting mostly mild steel plate may need one combination, while a fabrication line handling mixed work and varied thicknesses may need another.
Common specifications include torch-height control, a flame-cutting torch, a remote pendant, bed dividers, control boards and an operator stand. We discuss the actual work first, then match the options to it. In practice that usually means talking about sheet sizes, plate thicknesses, floor access, power availability and how the machine will sit within the workshop flow. Small details matter here and it saves trouble later.
- P-THC for torch-height control requirements
- P-FLAME where oxy-fuel cutting is part of the brief
- P-REMOTE for pendant operation from around the machine
- P-DIVIDER for bed management across different cutting tasks
- P-BOARD and P-CONTROL for the control arrangement specified on the order
The clients we work with
Most enquiries come from fabrication shops, steel service operations, maintenance departments, plant workshops and growing production businesses that need their own cutting capacity on site. Some want to move away from outsourced profile cutting. Others need more control over scheduling because parts cannot wait on a shared queue elsewhere.
We also work with buyers who already understand plasma cutting and simply need the right standard bed size with the right options. In other cases the enquiry comes from an owner or production lead who is planning the first CNC cutting station for the business. Those jobs need more discussion around handling space, plate movement and who will run the machine day to day. Gauteng work is common, especially Germiston and the East Rand, but we also deliver and commission in KwaZulu-Natal, the Western Cape and other parts of South Africa.
What happens inside the Germiston build bay
Our premises in Germiston are set up around the build and preparation of standard-bed plasma machines. This is where the frame, bed, control setup and selected options are assembled into the ordered configuration before dispatch. The work is handled by roles that stay close to the machine through the build and handover process.
The build bay team handles assembly and fitment. The electrical technician prepares the control side and checks the machine functions required on the order. The commissioning technician manages installation on site and operator handover. The sales and project role keeps the order aligned with the option schedule and the site details supplied by the customer. The work is hands-on, with practical checks through the build and preparation stages.
- Assembly work matched to the ordered bed size
- Option fitment according to the selected code list
- Pre-delivery checks before the machine leaves Germiston
- Planning for access, offloading and floor position at the customer site
From first enquiry to commissioning
A job normally starts when a customer sends the intended machine size, material type and required options through our contact form. From there we look at what needs to be cut, where the machine will stand and which options belong on the build. If something in the brief falls outside the standard range, we say so plainly. We stay within the three listed bed sizes and the option set that supports them.
Once the order is set, the machine is built in Germiston and prepared for delivery to site. Commissioning is done on the customer’s floor, with the machine positioned, connected and checked in its working environment. Operator training forms part of that handover, so the team running the machine can understand the controls, normal operating sequence and day-to-day handling. Workshop conditions differ from place to place, and on-site commissioning picks up issues that do not show while a machine is standing in a build bay.
After handover, we remain involved for machine support related to the standard-bed range we build. That includes follow-up on the specified machine and its fitted options, along with support for the build that left our shop.
Aftercare that stays tied to the original build
Good aftercare starts with a machine that was specified properly in the first place. Because our range is narrow, the support discussion stays tied to a known bed size and known option codes. That matters when a workshop calls about torch height behaviour, board layout, pendant operation or a flame setup. We work from the configuration that left our Germiston shop, with a clear parts trail and known option fitment.
For buyers planning a machine, the most useful first step is to send the intended sheet size, plate thickness range, site town and required options through our contact form. That gives enough detail to place the job within the 1.3 x 2.5 m, 1.5 x 3.0 m or 2.0 x 3.0 m range and point it toward the right setup.
Questions we get asked
Do you build plasma machines outside the three listed bed sizes?
CNC Plasma Machine builds standard-bed machines in 1.3 x 2.5 m, 1.5 x 3.0 m and 2.0 x 3.0 m sizes only. We do not take on heavy 3 metre plus gantries or custom oversize beds.
Can you add options like torch-height control or a flame torch?
Machines are configured by option code, including torch-height control, flame-cutting torch, remote pendant, bed dividers, control boards and the operator stand.
Do you install the machine at our premises?
Delivery is followed by commissioning on the customer’s floor, with operator training as part of the handover. We handle work in Gauteng, KwaZulu-Natal, the Western Cape and the rest of South Africa.
Also worth a look
Tell us about the job
Send sizes, materials and where you are through our contact form, and we will come back with the practical options.
Open the contact form